Fugaflex bejge - 2-component grout

Two component material. Component A is a cement-based, natural stone, synthetic resins and special pigments powder; component B is an elastomeric-based liquid for high resistance in compression and flexion, and high resistant towards chemical agents and washing detergents. JOINTS PREPARATION The surface covered with tiles and the spaces between them should be completely clean. If the tiles attachment is achieved through adhesive, the joints filling in walls should be made after 8-12 hours; joints filling in floors is made after 12-24 hours. If the tile attachment is achieved through traditional or pre-prepared cement-based mortar, then the joints filling in walls is made after 2-3 days and in floors after 8-10 days.MIXTURE PREPARATION First, mix 200gr of B component with 300 - 500 ml clean water, and then add A component in powder form. The stirring is realized through a low-revolution agitator (200-300 rotations/minute), until you see the creation of a homogneous mixture, free of granules. Following that, let the mixture to settle for 5 minutes, and then stir for another minute before its application. This way, the product will be ready for use.