Roof tile portuguese, Edilcentro, 26x41.6 cm, sole Tirana

Ceramic tile roof Edilcentro can be mounted on longitudinal sides, where this length does not exceed 9-10 meters, if it is advisable to interrupt the surface by inserting a second line of water collection (gutters). For the installation of a Portuguese tile requires a minimum slope of 30%. At slopes greater than 50% in strong windy areas, the elements should be fastened with the support with nails, screws or iron wire. Their regular installation is to be made by mounting the tiles on a suitable support. It says to be on a wooden cross-section with a 4x4 section fixed in parallel with the tire bowline by interrupting every 3-4 meters for a few centimeters to adjust the air circulation. The crosses between the slats should be suitable for the step of the tiles used and verified on the site prior to their use and assembly. The first stack, adjacent to the bow, should be at least 2 cm higher than the others to ensure a correct slope of the first row of tiles not covered from the following line.The first tile roof should be about 7-8 cm from the water collector (rain).