Aditiv Vaji Qeramik Arexons Pro Ceramic Plus 300Ml-9887

The main purpose of the oil is to lubricate the moving parts between each other. During engine operation at some point the mechanical components work under unsafe lubrication conditions. At these moments, metal-to-metal contact occurs and the following problems appear due to heavy consumption: During engine start-up: friction and wear are at very highest levels with consequences on subsequent wear. At high temperatures: the oil dilutes, reducing its lubricating power. In load variations: for example an "aggressive" acceleration. In addition, the following may occur: Wear of piston rings resulting in the appearance of excess white smoke in the exhaust gases. Excessive consumption of engine oil. Contaminated lubricant by the formation of sludge and deposits due to excessive friction. Ceramic Plus can solve all these problems that rise during engine operation. It has the following properties: Reduces friction and wear of engine components and mechanical transmissions. Increases lifespan and ensures smooth operation for engines and transmissions. Provides high efficiency thanks to reduced energy and fuel consumption. Reduces dangerous emissions. Suitable with all lubricants and oils. Extraordinary lubricating and slippery properties thanks to boron nitride powder which is finely dispersed. Good lubricating properties at both high and low temperatures. Good sliding and lubricating properties. High distribution stability, no sedimentation (oil separation) for long periods. Reacts with metal surface and protects engine up to 50,000 km. AREAS OF USE: Ceramic Plus is a lubricating additive for engines, transmissions, pumps and compressors (not suitable for automatic transmissions and oil bath clutches). Guarantees optimal lubrication even in the harshest engine operating conditions. Thanks to the synergistic combination of high-tech agents such as oil, anti-friction and anti-wear additives, boron nitride particles together create a "ceramic" coating on the metal reducing friction and wear. Covers metal surfaces and protects from friction. Increases performance, affects smooth operation and engine lifespan. HOW TO USE Shake before use. Add to the new oil and preferably in the case of oil change, in the ratio of 5% of the total amount of oil present. Recommended dose: 60 mL per 1 liter of oil. 300 mL of this additive is enough to treat up to 5 liters of oil. Observe the oil change intervals that are specified by the manufacturer. WARNINGS DO NOT use it for automatic transmissions and oil bath clutches. STORAGE Store in closed packaging at room temperature: minimum 36 months.