Acrylic exterior paint, Nirlat, Aquanir, first quality, base C, dissolves with 10% water and covers 16 m2/ Lt, in 2 coats, 18 L

Aquanir Acrylic Paint, 18 Lt, Base C. Flexible acrylic paint with exceptional coverage, usable outdoors. After painting, a soft velvet layer is obtained, which gives the wall of the house a pleasant, calm and elegant appearance .Durable over time and preserves the appearance.Nirocryl carries the Israel 1945 standard mark.Typical use: for exterior wall painting.Preparation of the surface: clean the surface well from impurities such as: lime, dust, layers of previous paint, grease, etc. , before you start painting. Make sure the previous paint is well adhered to the wall. Remove the wall chips well with a trowel and sandpaper. Cleaning: tools and hands should be cleaned with soap and water immediately after use. Characteristics of the coating of painting: shade of color: white plus 1500 shades from nirlat's nice catalog Gloss level: matte Material data: acrylic mixture based on water and mineral substances Dissolving: with water up to 20% for the first layer. 10% for the second layer. Coverage: 16 m2 per liter in two layers. Viscosity: 98KU ± 10%. The coverage ability is calculated according to the measurement of the work of an experienced and skilled worker, with a different degree of acquisition and may vary depending on the working method, surface and climatic conditions. Restrictions: do not apply the paint when the temperature is below 7°C or when rain is forecast. Drying time. For repainting: 2 hours (under normal weather conditions). To touch it: 1 hour. Complete drying: 24 hours.